Tuesday, February 2, 2010

DIY: Coasters, Part Two

Part One

While I was back at home for two weeks recently, I finally got around to getting my coasters done.  Most of them anyways.  Back in part one I said I was going to use the StazOn ink in black to stamp on them, but I changed my mind a little bit after running across some awesome embossing powder at the Unclaimed Freight store I was telling you all about.
I already had green pigment ink in a very similar color, so I decided to stamp on the coasters in green, and then emboss them with the green powder.  We just so happen to have an embossing heat gun laying around the house from my mom's stamping days, so it worked out perfectly.
I didn't take any pictures along the way, but basically you get your stamp inked really well, stamp onto your surface, and then coat the entire thing with embossing powder. 
Don't worry about using too much, because all you do is tap it off onto a piece of paper and funnel it back into the container.  After doing 100+ coasters the container looked like it had been barely touched.
Then all you have to do is heat up the powder and watch it turn.
I was doing all of them the first way and my sister came in and said I should do them on an angle to make them "more interesting."

Right now I have somewhere around 100 done, and I need to figure out how many more I want to do.  They're going to be sitting at the bar, so I don't know if everyone will grab one, if some people will grab one with each drink, etc.

Side story:  So you know the little caddies at a bar that hold napkins and straws and stuff?? Maybe?  Well I was telling my sister how I wanted to steal two of them from the bar we always go to, and she was saying she could probably get her friend's parent to get them for me since they own the bar.  I probably mentioned this like three times.  Then one day Mr. T's mom took me to a new little store in town to buy some spaghetti bowls she thought I would like.  It was a restaurant supply store that was open to the public, and a few rows in we found exactly what I was talking about.  There were two of them, they were black, and they were only $1.82 each!
In case you don't know what I'm talking about:
The coasters fit in perfectly, and now I want to find some cute straws and make some drink stirrers to go in those other little cubbie holes.  I'm pretty sure all 100+ fit in that container.  So then there will be another 100 at the other bar, and I can leave about 50 at each for refills as the night goes on.

And thanks to some of you girls, I was able to sell most of the extra coasters, so this project only ended up coasting me about $10 not including the stamp.

5 comments:

  1. Those look wonderful! And once I stole one of those plastic things that hold sweeteners from IHOP, good to know you can buy stuff like that! I don't know why I even swiped it, one of those wild nights out in college that leads you to do inexplicable things!

    ReplyDelete
  2. Love this idea! It would be so easy to do! Where did you buy the coasters from?

    ReplyDelete
  3. I ordered them from a store online. You have to buy 1000 though. I still have a couple hundred left if you're interested in any. Just let me know.
    kmattso2@gmail.com

    ReplyDelete
  4. Hello.... I just discovered your blog and i love it! Would it be possible for me to buy some of your left over coasters?!

    you can email me at msdevito@gmail.com

    Cristy :)

    ReplyDelete
  5. Where do you purchase the blank coasters to make this project?

    ReplyDelete

Related Posts with Thumbnails